Keurig 2.0 Not Pumping Water (Quick Fix)

You just bought a new Keurig 2.0 Coffee Maker and couldn’t be more excited! But, right now you’re wondering why the machine isn’t pumping water. Not pumping water is a common issue with many new Keurig machines, and while it can seem like a small problem, it’s an important one. If you’re reading this, it means that you’re probably curious about this too. Keep reading for a quick fix to your Keurig 2.0 Not Pumping Water.

Table of Contents

What is a Keurig 2.0 Coffee Maker?

The Keurig 2.0 is a brewing system that features K Cup pod scanning technology. It restricts usage to Keurig licensed pods, but it also automates functionality to control brew temperature and brew size for extra large mug sized single serve pods or 4 cup carafe pods – as well as brewing a better cup of coffee.

Why A Keurig 2.0 Not Pumping Water (Top Reason)

There are a handful of common reasons why Keurig 2.0 Not Pumping Water.

There is not enough water in the tank
There is an issue with the water magnet
There is some debris blocking the exit from the water tank
Air may have gotten into the water pipes, causing a blockage
Limescale buildup is blocking the proper water flow inside the machine
The entry and / or exit needles are clogged

You should always keep your water tank filled to the max line. Here is how you can attempt to fix the other potential issues.

How to Fix Keurig 2.0 Not Pumping Water: (5 Easy Solution)

Let’s discuss How to Fix Keurig 2.0 Not Pumping Water.

Solution 1: Clear The Water Tank Exit

To ensure the water can freely flow, make sure your tank is securely attached. If it is, there may be mineral buildup around the exit nozzle that’s clogging and forcing your Keurig to stop pumping water. Here’s how to assess this issue and unclog it:

Empty the water tank. Remove the water filter holder.
Flip the the reservoir over. Locate the nozzle with the spring. Take something dull like a the eraser end of a pencil and try pushing the spring down a few times. If it moves with ease, you can rule out any issues with that piece.
Put the tank back on the machine. Fill it with about two to three inches of water.
Grab a turkey baster. Suck up a little of the water from the tank.
Squirt the baster directly into that top side of the black nozzle where the water should exit the tank. Repeat this several times, working all the way around the nozzle two or three times.

If you start to see particles floating up from the nozzle, this is calcium buildup that was causing the block. Try running a hot water cycle into a measuring cup to see if the machine will pump water and brew a full cup.

Solution 2: Clear A Possible Air Lock

If you every accidentally ran a brew cycle with not enough water in the tank, it is possible that air has gotten inside the water tubes. This may be causing a clog that is preventing the Keurig from pumping water.

Fill the tank about a quarter of the way with water.
Lift the tank up and down quickly. You should see little air bubbles coming up from the water intake valve at the base of the reservoir. Repeat until the bubbles stop appearing.
Fill the water tank with water to the max line. Run a hot water brew cycle. If water starts flowing through the machine, you’ve fixed the issue.

Solution 3: Descale To Remove Internal Water Flow Blocks

If you are finding calcium buildup in your water tank, it is likely inside the machine as well. As the water used to brew your K-cups moves through and out of the brewer, it leaves minerals behind that cause limescale to build up inside of your machine. Eventually this buildup can get big enough for clogging which will result in not being able to dispense any or enough water from my Keurig when this happens.

You should descale your coffee machine every 3 to 6 months, even if you are using a water filter. If you have “hard water,” which means it has a high level of minerals, then you should descale it more often. You can buy testing kits for low cost if you want to know whether or not your tap has hard water.

Keurig makes its own descaling solution that works with all models. The safe formula has no odor and acts fast to remove mineral buildup with gentle citric acid. You can buy the solution alone or as part of a bundle with rinse pods and filters that will also help you keep your machine clean.

Once you have the descaling solution, follow these instructions to descale your Keurig. If you’ve had your machine for more than 6 months and never descaled, or if you have very hard water, you may need to run this process at least 2 times.

Solution 4: Unclog The Needles

When you brew with a K-Cup, there are needles that puncture the coffee pod; this allows hot water to pass through and eventually reach your cup. Coffee grounds can get stuck around these needles, so they become dry and hard. This is more likely to happen if you don’t dispose of the pods right after brewing. As a result, ground coffee build up starts to block water flow inside your Keurig which will lead it not being able to pump out any more water – clogged needle!

If you have a Keurig 2.0, you can use the orange cleaning tool that came with your brewer.

Straighten one end of a paper clip.
Turn off the brewer and unplug it and remove the water reservoir.
Grab the sides of the pod holder and remove it from the brewer by gently pulling away.
Press the button on both sides to separate the holder from the housing. Push the lever to show the exit needle, then hold it down while flipping the holder over.
Insert the straight end of the needle and then move it around in a circle a few times. Rinse the pod holder with water and set it aside.
Open the handle and look underneath to see the top entrance and exit needles. Insert the paper clip in each and move it around to clean.

Solution 5: Check The Water Magnet Alignment

When you look inside your water tank, you’ll notice there is a magnet. This magnet is what triggers the Keurig machine to detect the level of water in your reservoir and brew accordingly. Over time, this magnetic can become misaligned and stuck due to vibrations from the machine while brewing. When this happens, it will be unable to detect how much water needs pumping through and may not do anything at all!

To fix this gently tap the tank near the magnet housing. If this doesn’t move it try giving it a little shake. If it is still stuck after this, empty any water in the tank, clean it with a gentle soap and then fill it with water again. If you can’t get it to move, you will likely need to get a replacement tank.

Conclusion

Hopefully, you now have enough information to fix your Keurig 2.0 Not Pumping Water Go ahead and try the tips mentioned above and your machine will work as before.

Frequently Asked Questions

How do you fix a Keurig that won’t pump water?

The simplest is to take out the Keurig water reservoir, empty it out, and refill it about a third of the way.
Then shake the water around in the Keurig water reservoir. Spill the water out. Find the opening where the Keurig pump pumps the water into the brewer.
Fully clean the opening with a dishtowel to clear it of any debris that may be obstructing the action of the Keurig water pump.

What do you do when your Keurig 2.0 won’t brew?

Check to make sure that the brewer is plugged securely; unplug and plug in the brewer; plug the brewer into a different outlet.

Why is nothing coming out of my Keurig?

The Keurig may not be brewing if the machine was overfilled or the wrong pods were used. Another culprit could be debris, again, having clogged the needle. Empty the drip tray. Use a cup under the dispenser and try to brew after you’re sure that there’s the exact recommended amount of water in the reservoir.

Related Post