Resetting the Nespresso Vertuo involves a few straightforward steps that vary slightly depending on the model you own.
Most models require a simple sequence of button presses, but specifics like removing accessories or the exact number of presses can differ.
I’ll guide you through these steps to ensure your coffee machine is back to making the perfect cup every time.
Table of Contents
How To Reset Nespresso Vertuo Machines:
Vertuo
Resetting the standard Vertuo model:
- Open the machine head.
- Remove the used coffee pod from the coffee machine.
- The machine light must remain steady.
- Close the machine head.
- Leave the handle unlocked.
- Press the button five times within three seconds.
- The button will blink orange five times and then stay on white.
Vertuo Next
For the Vertuo Next model, follow these steps to reset your machine:
- Open the machine head.
- Remove the used coffee capsule.
- Close the machine head.
- Keep the handle in the “unlock” position.
- Quickly press the button five times within three seconds.
- The reset is complete when the light blinks orange five times and then stabilizes to a steady white.
Read: How to Clean Nespresso Vertuo Next
VertuoPlus
To reset the VertuoPlus model, proceed as follows:
- Turn off the machine by pushing the lever down for three seconds.
- Press the button and push the lever down simultaneously for another three seconds to enter the factory settings mode, indicated by a solid orange light.
- Choose the “reset to factory settings” option by pressing the lever down three times; the light will begin blinking orange.
- Finalize the reset by pressing the button once.
- The process is completed when the orange light blinks three times quickly and then changes to a steady green.
Learn: Nest Espresso Machine for Iced Lattes
Evoluo
The resetting steps for the Evoluo model are identical to those of the Vertuo Next:
- Open the machine head.
- Dispose of any used coffee capsules.
- Close the machine head.
- Ensure the handle remains in the “unlock” position.
- Press the button five times rapidly within three seconds.
- The reset is confirmed by the orange light blinking five times before turning steadily white.
How to Fix Common Nespresso Vertuo Problems
No light on the button appears
This happens when the Vertuo machine has automatically turned off after 2 minutes of non-use.
Press the button or unlock the machine.
There are coffee grounds left in the cup
When grounds are left over in your cup, it means your machine needs a clean.
For best results, use a coffee dealing kit from Nespresso found here, or, use the handy cleaning pods from Caffenu.
Your Vertuo machine doesn’t start and has a blinking light
Ensure the capsule is correctly inserted and that the machine is securely locked.
If running a descaling cycle, ensure that there is no capsule left inside the machine and that the handle is properly locked.
Your machine is leaking
First, check the water tank to make sure it is connected properly. Look for any blockages in the tank too.
Look for any coffee grounds or residue stuck anywhere inside your machine and clear it out.
Then, run another cleaning cycle.
These two issues can also impact the flow of your coffee.
The light on your Vertuo is blinking or flashing white
This often occurs when the machine needs a firmware update. you will need to restart your coffee machine.
First, make sure the machine is turned off. Remove the power cord from the outlet.
Wait for ten seconds.
Plug the machine back in and wait for three minutes,
If the process is successful, the light should become steady and ready to use.